[1]

Verma MK, Shakya S, Kumar P, Madhavi J, Murugaiyan J, et al. 2021. Trends in packaging material for food products: historical background, current scenario, and future prospects. Journal of Food Science and Technology 58:4069−82

doi: 10.1007/s13197-021-04964-2
[2]

Marsh K, Bugusu B. 2007. Food packaging—Roles, materials, and environmental issues. Journal of Food Science 72:R39−R55

doi: 10.1111/j.1750-3841.2007.00301.x
[3]

Zhang R, He Y, Dauletbek A, Shen Z, Zhou Y, et al. 2022. Design and manufacture of laminated veneer lumber packaging boxes and pallets and evaluation of their mechanical properties. BioResources 17:6910−25

doi: 10.15376/biores.17.4.6910-6925
[4]

Percin O, Altunok M. 2017. Some physical and mechanical properties of laminated veneer lumber reinforced with carbon fiber using heat-treated beech veneer. European Journal of Wood and Wood Products 75:193−201

doi: 10.1007/s00107-016-1125-z
[5]

Sözen E, Kayahan K, Bardak T, Bardak S. 2021. The effects of the moisture content of laminated veneer lumber on bending strength and deformation determination via two-dimensional digital image correlation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:5603−15

doi: 10.1177/0954406220986181
[6]

Zhou H, Wei X, Smith LM, Wang G, Chen F. 2019. Evaluation of uniformity of bamboo bundle veneer and bamboo bundle laminated veneer lumber (BLVL). Forests 10:921

doi: 10.3390/f10100921
[7]

Kamala BS, Kumar P, Rao RV, Sharma SN. 1999. Performance test of Laminated Veneer Lumber (LVL) from rubber wood for different physical and mechanical properties. Holz als Roh - und Werkstoff 57:114−16

doi: 10.1007/s001070050025
[8]

Cai Y, An X, Zou Q, Fu H, Yang X, et al. 2021. Mechanical properties and failure mechanisms of composite laminates with classical fabric stacking patterns. Journal of Materials Science 56:11814−27

doi: 10.1007/s10853-021-06073-z
[9]

Zhang J, Song W, Jiang B, Li M. 2018. Measurement of lumber moisture content based on PCA and GS-SVM. Journal of Forestry Research 29:557−64

doi: 10.1007/s11676-017-0448-x
[10]

Fukui T, Yanase Y, Sawada Y, Fujii Y. 2020. Estimations of the moisture content above the fiber saturation point in sugi wood using the correlation between the specific dynamic Young’s modulus and tangent loss. Journal of Wood Science 66:35

doi: 10.1186/s10086-020-01879-y
[11]

Báder M, Németh R. 2019. Moisture-dependent mechanical properties of longitudinally compressed wood. European Journal of Wood and Wood Products 77:1009−19

doi: 10.1007/s00107-019-01448-1
[12]

Yilmaz Aydin T, Ozveren A. 2019. Effects of moisture content on elastic constants of fir wood. European Journal of Wood and Wood Products 77:63−70

doi: 10.1007/s00107-018-1363-3
[13]

Wang J, Cao X, Liu H. 2021. A review of the long-term effects of humidity on the mechanical properties of wood and wood-based products. European Journal of Wood and Wood Products 79:245−59

doi: 10.1007/s00107-020-01623-9
[14]

Wei Y, Rao F, Yu Y, Huang Y, Yu W. 2019. Fabrication and performance evaluation of a novel laminated veneer lumber (LVL) made from hybrid poplar. European Journal of Wood and Wood Products 77:381−91

doi: 10.1007/s00107-019-01394-y
[15]

Engelund ET, Thygesen LG, Svensson S, Hill CAS. 2013. A critical discussion of the physics of wood–water interactions. Wood Science and Technology 47:141−61

doi: 10.1007/s00226-012-0514-7
[16]

Zelinka SL, Glass SV, Jakes JE, Stone DS. 2016. A solution thermodynamics definition of the fiber saturation point and the derivation of a wood–water phase (state) diagram. Wood Science and Technology 50:443−62

doi: 10.1007/s00226-015-0788-7
[17]

Wiberg P, Morén WJ. 1999. Moisture flux determination in wood during drying above fibre saturation point using CT-scanning and digital image processing. Holz als Roh - und Werkstoff 57:137−44

doi: 10.1007/s001070050029
[18]

Kokutse AD, Brancheriau L, Chaix G. 2010. Rapid prediction of shrinkage and fibre saturation point on teak (Tectona grandis) wood based on near-infrared spectroscopy. Annals of Forest Science 67:403

doi: 10.1051/forest/2009123
[19]

Kržišnik D, Lesar B, Thaler N, Planinšič J, Humar M. 2020. A study on the moisture performance of wood determined in laboratory and field trials. European Journal of Wood and Wood Products 78:219−35

doi: 10.1007/s00107-020-01506-z
[20]

Dietsch P, Franke S, Franke B, Gamper A, Winter S. 2015. Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring 5:115−27

doi: 10.1007/s13349-014-0082-7
[21]

Yang L, Tian G, Yang S, Shang L, Liu X, et al. 2020. Determination of fiber saturation point of rattan (Calamus simplicifolius) using the LF-NMR and two conventional methods. Wood Science and Technology 54:667−82

doi: 10.1007/s00226-020-01177-2
[22]

Lamason C, Macmillan B, Balcom B, Leblon B, Pirouz Z. 2015. Water content measurement in black spruce and aspen sapwood with benchtop and portable magnetic resonance devices. Wood Material Science & Engineering 10:86−93

doi: 10.1080/17480272.2015.1010573
[23]

Gezici-Koç Ö, Erich SJF, Huinink HP, van der Ven LGJ, Adan OCG. 2017. Bound and free water distribution in wood during water uptake and drying as measured by 1D magnetic resonance imaging. Cellulose 24:535−53

doi: 10.1007/s10570-016-1173-x
[24]

Johansson J, Blom Å, Dvinskikh S. 2013. NMR-measurements for determination of local moisture content of coated wood. Journal of Coatings Technology and Research 10:601−7

doi: 10.1007/s11998-013-9484-4
[25]

Kwon JH, Shin RH, Ayrilmis N, Han TH. 2014. Properties of solid wood and laminated wood lumber manufactured by cold pressing and heat treatment. Materials & Design (1980-2015) 62:375−81

doi: 10.1016/j.matdes.2014.05.032
[26]

He Z, Qian J, Qu L, Yan N, Yi S. 2019. Effects of Tung oil treatment on wood hygroscopicity, dimensional stability and thermostability. Industrial Crops and Products 140:111647

doi: 10.1016/j.indcrop.2019.111647
[27]

Cai C, Javed MA, Komulainen S, Telkki VV, Haapala A, et al. 2020. Effect of natural weathering on water absorption and pore size distribution in thermally modified wood determined by nuclear magnetic resonance. Cellulose 27:4235−47

doi: 10.1007/s10570-020-03093-x
[28]

Telkki VV, Yliniemi M, Jokisaari J. 2013. Moisture in softwoods: fiber saturation point, hydroxyl site content, and the amount of micropores as determined from NMR relaxation time distributions. Holzforschung 67:291

doi: 10.1515/hf-2012-0057
[29]

Çolak S, Çolakoğlu G, Aydin I. 2007. Effects of logs steaming, veneer drying and aging on the mechanical properties of laminated veneer lumber (LVL). Building and Environment 42:93−98

doi: 10.1016/j.buildenv.2005.08.008
[30]

Chen F, Jiang Z, Wang G, Li H, Simth LM, et al. 2016. The bending properties of bamboo bundle laminated veneer lumber (BLVL) double beams. Construction and Building Materials 119:145−51

doi: 10.1016/j.conbuildmat.2016.03.114
[31]

Almeida G, Gagné S, Hernández RE. 2007. A NMR study of water distribution in hardwoods at several equilibrium moisture contents. Wood Science and Technology 41:293−307

doi: 10.1007/s00226-006-0116-3
[32]

Merela M, Oven P, Serša I, Mikac U. 2009. A single point NMR method for an instantaneous determination of the moisture content of wood. Holzforschung 63:348−51

doi: 10.1515/HF.2009.050
[33]

Schmidt SJ. 1991. Determination of moisture content by pulsed nuclear magnetic resonance spectroscopy. In Water Relationships in Foods. Advances in Experimental Medicine and Biology, ed. Levine H, Slade L. Boston, MA: Springer US. pp. 599−613. https://doi.org/10.1007/978-1-4899-0664-9_32
[34]

Wang W, Chen J, Cao J. 2019. Using low-field NMR and MRI to characterize water status and distribution in modified wood during water absorption. Holzforschung 73:997−1004

doi: 10.1515/hf-2018-0293
[35]

Cox J, McDonald PJ, Gardiner BA. 2010. A study of water exchange in wood by means of 2D NMR relaxation correlation and exchange. Holzforschung 64:259−66

doi: 10.1515/hf.2010.036