[1]

Zhang Z, Zhang B, Deng B, Wei X, Wang J. 2018. Opportunities and challenges of metamaterial-based wireless power transfer for electric vehicles. Wireless Power Transfer 5(1):9−19

doi: 10.1017/wpt.2017.12
[2]

Su Y, Zhou W, Hu A, Sun Y, Chen L. 2015. A power-signal parallel transmission technology for ECPT systems based on duty cycle modulation of square wave carrier. Transactions of China Electrotechnical Society 30(21):51−56

doi: 10.19595/j.cnki.1000-6753.tces.2015.21.006
[3]

Guo Z, Nai J, Chen S, Zhang H, Ye M, et al. 2025. Optimized configuration and characterization of LCC-S based wireless power transmission system. Wireless Power Transfer 12:e012

doi: 10.48130/wpt-0025-0005
[4]

Hu J, Luo C, Hong Y, Wang G, Fan X, et al. 2025. Deployment optimization of laser chargers in self-organizing power transfer internet of things. Wireless Power Transfer 12:e010

doi: 10.48130/wpt-0025-0004
[5]

Li Y, Gui L, Jiang Y, Jing R, Li Y, et al. 2024. Optimal configuration of single-layer domino-coils with uniform spacing for online monitoring equipment in smart grid. IEEE Transactions On Power Electronics 39(11):14307−17

doi: 10.1109/TPEL.2024.3426589
[6]

Wu Z, Tan L, Xu H, Shen S, Huang X. 2024. Design of the long-distance wireless power transfer system with multiple relay coils based on loss optimization. Electrical Engineering 106(3):3337−48

doi: 10.1007/s00202-023-02157-y
[7]

Li X, Yin W, Zhou X, Wang C, Sun W, et al. 2024. Analysis of wireless power transfer characteristics with multiple relay coils based on COMSOL. Journal of Mudanjiang Normal University (Natural Sciences Edition) 2024(2):31−35 (in Chinese)

doi: 10.13815/j.cnki.jmtc(ns).2024.02.016
[8]

Gu WJ, Harada K. 1988. A new method to regulate resonant converters. IEEE Transactions on Power Electronics 4(3):430−39

doi: 10.1109/63.17964
[9]

Wang X Q, Xu J P, Leng M R, Ma, He S Z. 2021. A hybrid control strategy of LCC-S compensated WPT system for wide output voltage and ZVS range with minimized reactive current. IEEE Transactions on Industrial Electronics 68(9):7908−20

doi: 10.1109/TIE.2020.3013788
[10]

Pang H, Xu F, Liu W, Tse Chi K, Chau KT. 2024. Impedance Buffer-based reactance cancellation method for CLC-S compensated wireless power transfer. IEEE Transactions on Industrial Electronics 71(7):6894−906

doi: 10.1109/TIE.2023.3314863
[11]

Cao L, Bao J, Loo KH, Pan X, Zhang R. 2023. A hybrid control strategy for dynamic compensation of cross-coupling effect in two-load IPT system. IET Power Electronics 16(12):1943−57

doi: 10.1049/pel2.12513
[12]

Chen C, Zhou H, Deng Q, Hu W, Yu Y, et al. 2019. Modeling and design of zero-voltage-switching controller for wireless power transfer systems based on closed-loop dominant pole. Journal of Power Electronics 19(5):1235−47

doi: 10.6113/JPE.2019.19.5.1235
[13]

Yu Z, Shan M, Du H, Lei Y. 2024. Global optimization of transmission efficiency in multi-relay MC-WPT system based on switching topology for enhanced tracing. IEEE 2nd International Conference on Power Science and Technology (ICPST), 9−11 May 2024, Dali, China. pp. 763−68 doi: 10.1109/ICPST61417.2024.10602044
[14]

Hou X, Xia H, Shi Y. 2023. Research on segmented compensation technology for three-coil WPT system. Journal of Power Supply 21(6):49−56

doi: 10.13234/j.issn.2095-2805.2023.6.49
[15]

Hou X, Su Y, Zuo Z, Dai X, Fei Y. 2021. A novel analysis method based on quadratic eigenvalue problem for multirelay magnetic coupling wireless power transfer. IEEE Transactions on Power Electronics 36(9):9907−17

doi: 10.1109/TPEL.2021.3062394