[1]

Lu ZH, Wen JL, Li CQ, Wang J. 2025. Experimental study on the mixed-mode interface fracture between track slab and CA mortar layer in CRTS II slab ballastless track structures. Structures 82:110588

doi: 10.1016/j.istruc.2025.110588
[2]

Zhong Y, Gao L, Zhang Y. 2018. Effect of daily changing temperature on the curling behavior and interface stress of slab track in construction stage. Construction and Building Materials 185:638−647

doi: 10.1016/j.conbuildmat.2018.06.224
[3]

Lou P, Sun Z. 2023. Service performance of CRTS II ballastless track in high temperature tunnel. Construction and Building Materials 400:132705

doi: 10.1016/j.conbuildmat.2023.132705
[4]

Zhang XY, Lu ZH, Zhao YG, Li CQ. 2023. Optimum maintenance strategy for CRTS II slab track based on time-dependent system reliability. Structures 50:387−399

doi: 10.1016/j.istruc.2023.02.038
[5]

Cui X, Du B, Xiao H, Zhou R, Guo G, et al. 2021. Interface damage and arching mechanism of CRTS II slab track under temperature load. Construction and Building Materials 291:123258

doi: 10.1016/j.conbuildmat.2021.123258
[6]

Song L, Liu H, Cui C, Yu Z, Li Z. 2020. Thermal deformation and interfacial separation of a CRTS II slab ballastless track multilayer structure used in high-speed railways based on meteorological data. Construction and Building Materials 237:117528

doi: 10.1016/j.conbuildmat.2019.117528
[7]

Ren J, Wang J, Li X, Wei K, Li H, et al. 2020. Influence of cement asphalt mortar debonding on the damage distribution and mechanical responses of CRTS I prefabricated slab. Construction and Building Materials 230:116995

doi: 10.1016/j.conbuildmat.2019.116995
[8]

Xu C, Ou Y, Wu H, Zeng Z, Zhao P. 2025. Study on the spatiotemporal evolution characteristics of the non-uniform temperature field and temperature effects of CRTS II slab track. Engineering Structures 343:121007

doi: 10.1016/j.engstruct.2025.121007
[9]

Xu C, Xu T, Liu W, Wang Z, Zhao P. 2025. Thermal-induced upwarp buckling analysis of CRTS II slab ballastless tracks experiencing joint damage. Journal of Zhejiang University: Science A 26(8):738−754

doi: 10.1631/jzus.A2400357
[10]

Su R, Su Q, Luo A, Pei Y. 2026. Experimental and numerical investigation on the aging performance of the composite heat-reflective coating for ballastless track under high temperature and radiation. Progress in Organic Coatings 210:109671

doi: 10.1016/j.porgcoat.2025.109671
[11]

Wu K, Zhang Y, Liu L, Jiang J, Hu Y. 2025. Static and fatigue performance of the interface between the concrete slab and epoxy resin in CRTS II slab track: an experimental and comparative study. Construction and Building Materials 505:144638

doi: 10.1016/j.conbuildmat.2025.144638
[12]

Cui X, Liu Y, Xu H, Xiao H, Chi Y, et al. 2025. Effects of temperature changes on the thermomechanical behavior and interface stress of longitudinal connected slab track. Ain Shams Engineering Journal 16(11):103719

doi: 10.1016/j.asej.2025.103719
[13]

Dong B, Chen ZY, Zhu H, Cai XP, Zhang X, et al. 2025. Deformation characteristics and interfacial damage of CRTS II slab track joints under operating temperature conditions. Journal of Central South University 32(9):3657−3674

doi: 10.1007/s11771-025-6065-5
[14]

Xu LY, Xie J, Xu P, Yan JB, Zang CZ, et al. 2025. Stability analysis of longitudinally connected CRTSII track slabs under thermal loads. KSCE Journal of Civil Engineering 29(2):100122

doi: 10.1016/j.kscej.2024.100122
[15]

Song A, Yao G, Guo Y, Zhang G, Yu X. 2024. Study on interfacial mechanical properties and structural detail damage of CRTS II slab ballastless track. Scientific Reports 14:31354

doi: 10.1038/s41598-024-82822-9
[16]

Su M, Zhang W, Zhu Q, Wang J, Peng H. 2025. Static and fatigue experimental study on the interfacial Mode-I and Mode-II fracture performance of concrete-to-CA mortar joints. Construction and Building Materials 497:143943

doi: 10.1016/j.conbuildmat.2025.143943
[17]

Li Y, Chen J, Wang J, Shi X, Wang R. 2021. Interfacial failure and arching of the CRTS II slab track reinforced by post-installed reinforcement bars due to thermal effects. Engineering Failure Analysis 125:105405

doi: 10.1016/j.engfailanal.2021.105405
[18]

Ma Z, Gao L, Liu X, Chai X, Ling L. 2024. Slab arching degree identification and evaluation based on track dynamic inspection data. Engineering Failure Analysis 155:107733

doi: 10.1016/j.engfailanal.2023.107733
[19]

Ma Z, Gao L, Liu X, An B. 2021. Detection of CRTS II slab track arching based on dynamic responses of the car body. Engineering Failure Analysis 130:105770

doi: 10.1016/j.engfailanal.2021.105770
[20]

Xu Y, Yan D, Zhu W, Zhou Y. 2020. Study on the mechanical performance and interface damage of CRTS II slab track with debonding repairment. Construction and Building Materials 257:119600

doi: 10.1016/j.conbuildmat.2020.119600
[21]

Xu Y, Miao W, Yan D, Zhu W, Xu W. 2021. Warping features of ballastless track-slab under debonding-repaired condition. Journal of Tongji University (Natural Science) 49(3):400−410 (in Chinese)

doi: 10.11908/j.issn.0253-374x.20309
[22]

Wu W, Liu P, Gong YF. 2025. Interfacial separation in CRTS II type slab track structure subjected to continuous high temperatures: thermal and moisture effects. Applied Thermal Engineering 261:125092

doi: 10.1016/j.applthermaleng.2024.125092
[23]

Xie K, Dai W, Zhao W, Feng H, Zhao Z. 2025. Study of the diffusion characteristics of repair slurry for the interface damage in CRTS II slab ballastless track considering the time-varying viscosity. Construction and Building Materials 467:140429

doi: 10.1016/j.conbuildmat.2025.140429
[24]

Zhao J, Zhao W, Xie K, Song W, Wang C. 2025. Study on damage propagation of CA mortar layer for CRTS II slab ballastless track under vehicle-induced hydrodynamic pressure. Engineering Failure Analysis 171:109356

doi: 10.1016/j.engfailanal.2025.109356
[25]

Zhong Y, Gao L, Hou B. 2018. Shear behavior of mortar layer in continuous slab track with different arrangement schemes of embedded steel bars. Journal of Southwest Jiaotong University 53(1):38−45,63 (in Chinese)

doi: 10.3969/j.issn.0258-2724.2018.01.005
[26]

Hernández-Pérez I, Xamán J, Macías-Melo EV, Aguilar-Castro KM, Zavala-Guillén I, et al. 2018. Experimental thermal evaluation of building roofs with conventional and reflective coatings. Energy and Buildings 158:569−579

doi: 10.1016/j.enbuild.2017.09.085
[27]

Cao K, Huang S, Chen J, Li Y, Li H. 2025. Study on damage of CRTS II slab tracks in coated-uncoated transition zones subjected to temperature and train loads. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 239(1):17−28

doi: 10.1177/09544097241281767
[28]

Huang Y, Gao L, Zhong Y, Zhou C. 2021. Study on the damage evolution of the joint and the arching deformation of CRTS-II ballastless slab track under complex temperature loading. Construction and Building Materials 309:125083

doi: 10.1016/j.conbuildmat.2021.125083
[29]

Li Y, Chen J, Jiang Z, Cheng G, Wang J, et al. 2021. Thermal performance of the solar reflective fluorocarbon coating and its effects on the mechanical behavior of the ballastless track. Construction and Building Materials 291:123260

doi: 10.1016/j.conbuildmat.2021.123260
[30]

Wang H, Liang Y, Xu L, Kou S, Xu P. 2022. Research on the release and control technology scheme of CRTS II track slab. Journal of Railway Engineering Society 39(8):40−45 (in Chinese)

doi: 10.3969/j.issn.1006-2106.2022.08.008
[31]

Zhang P. 2018. Study on longitudinal forces of continuously welded rail on bridges with CRTS II slab ballastless track under complex loading conditions. Thesis. Beijing Jiaotong University, Beijing, China. pp. 48–51
[32]

Cai J, Chen J, Wang J, Chen L, Li Y, et al. 2023. Study on unlocking temperature of CRTS II slab track with weak longitudinal connection. Journal of Railway Science and Engineering 20(5):1533−1542 (in Chinese)

doi: 10.19713/j.cnki.43-1423/u.T20220920